Advanced Manufacturing Process CNC Lathe Machine Manufacturer

First, the choice of the right cutting volume: for high-efficiency metal cutting, the cutting material, cutting tools and cutting conditions are the three main factors, they determine the working time, tool life and quality of work, the cost-effectiveness of the processing method is to choose the right cutting conditions absolutely.
The selection of the most suitable processing conditions will be selected on the basis of these factors. There are rules. Stable wear and tear extending the new service life is a suitable condition.
However, CNC lathe manufacturers in practice, the choice of tool life is related to the wear of the tool, the change in the size processed, the quality of the surface, the noise from cutting, heat treatment, etc. when determining the processing conditions. A case-by-case study is required. For hard-to-process materials such as stainless steel and heat-resistant alloys, coolants or blades with good hardness may be used.
Second, the relationship between the processing path and the processing tolerance: At present, CNC lathes are not yet widely used. Generally, too much tolerance should be set on the raw workpiece. Especially, the tolerance with punching, hard shell casting is arranged for processing on the general lathe. If you need to process with a CNC lathe, you need to pay attention to the flexible programming arrangement.
Third, the determination of the work path: the work path refers to the movement and direction of the respective parts of the tool during CNC machining.
1. Must ensure the processing accuracy and rough surface requirements.
2. Try to shorten the processing time and reduce the idle travel time of the tool.
Suitable selection clip:
1. Try to choose general fasteners to fasten the workpiece, avoid using special fasteners.
2. Matching part positioning reference points to reduce positioning errors
Fifth, choosing the right cutting tool:
1. When riding rough, the tool should be selected with high strength, good durability, to meet the requirement of cutting quantity, large feed quantity when riding rough.
2. When driving fine design, choose the tool with high precision and good durability to ensure that it meets the requirements of processing precision.
3. In order to reduce the time to change tools and for the convenience of tool inspection, it should try to use a cutter and a blade cutter.